產品及服務

Bellco
GBS 2000 Glass Ball Spinner Systems

GBS 2000

GBS 2000 玻璃球旋轉系統

產品說明
The spinner flasks feature a specially formed bottom indent that aids in preventing the accumulation of microcarrier beads in the bottom of the vessel. The glass impeller shaft is attached to a vented fitting on the PTFE cap seal by a length of standard silicone tubing. This special venting prevents separation of the silicone tubing from the cap seal fitting during steam autoclaving. The glass ball houses a circular magnet that acts to gently agitate the microcarrier beads and to keep them in suspension to insure optimal growth of cell cultures.

Glass Ball Spinner Systems are available in 5 sizes and have two angled sidearms. 100mL and 250mL sizes have 32mm blue polypropylene caps and pouring rings. 500mL, 1000mL and 3000mL sizes have 45mm blue polypropylene caps and pouring rings.
規格說明
Graduations: 100mL in 20mL increments
  • 250mL in 50mL increments
  • 500mL in 50mL increments
  • 1000mL in 100mL increments
  • 3000mL in 500mL increments

Stock Number Description Cap Center (mm) Approx. OAH x Diam.
1965-92001 100mL Complete 70 145mm x 63mm
1965-92002 250mL Complete 70 135mm x 85mm
1965-92005 500mL Complete 100 180mm x 110mm
1965-92010 1L Complete 100 250mm x 135mm
1965-92030 3L Complete 100 280mm x 165mm
1965-94010 100mL Flask Only 70 135mm x 63mm
1965-94025 250mL Flask Only 70 125mm x 85mm
1965-94050 500mL Flask Only 100 170mm x 110mm
1965-94100 1L Flask Only 100 240mm x 135mm
1965-94300 3L Flask Only 100 270mm x 165mm
1965-95010 100mL Impeller Only    
1965-95025 250mL Impeller Only    
1965-95050 500mL Impeller Only    
1965-95100 1L Impeller Only    
1965-95300 3L Impeller Only    
Loading...
Loading...